The resolution of the Sanyo PLC-XU3001 is specified at 1024 x 768 pixels (XGA). The contrast ratio should be 500 to 1 and indicates the maximum achievable brightness of the manufacturer with 3000 ANSI lumens. With the aforementioned values of the projector to the optimum in terms of daylight comes pretty close to projections. Completely darkened rooms, the presentation at least in this appliance be no more. As with all projectors that will be presented in 2011, also has the Sanyo PLC-XU3001 known about the automatic keystone correction and a zoom lens, which can be helpful especially for different projection distances.
Sanyo PLC-XU3001 Features
The view of the interfaces revealed a DVI-I and VGA port. Alternatively, analog and digital data sources are used. In addition, you can of course this device via a home network remotely via a wired connection. About Wi-Fi has the Sanyo PLC-XU3001 not exist. There is an automated mail should ever malfunction must be reported in the unit. Prerequisite for this course, the LAN port on the projector to the network.
As for the sound, so you can look forward as the owner of the Sanyo PLC-XU3001 about seven watts boxes that perform no miracles but to accomplish but certainly sufficient performance for presentations. Keep your eyes on the noise level, which manufactures the new projectors. Here is the speech of 34 decibels, which is not exactly quiet, but not completely out of the proposed standard. The lamp life is specified as usual at 2000 hours in ECO mode is extended to 2500 hours at an operating noise of 29 dB and an ANSI lumen intensity of 2100th If everything goes according to plan, Sanyo PLC-XU3001 is already available in July for 850 €.
0 comments:
Post a Comment